mjb/altos/src/avr/ao_pins.h, branch telelaunchtwo

altos: Let AVR products override the stack size. Set telepyro to 104

2012-10-23T04:37:25+00:00

Otherwise, telepyro doesn't have enough ram... Signed-off-by: Keith Packard

altos: Only enable PWM on telescience_pwm product

2012-10-17T05:17:25+00:00

Signed-off-by: Keith Packard

telescience: steal last adc channel for icp3 most recent value

2012-10-17T05:11:12+00:00

Make the ICP3 rpm counter use in ao_adc_avr.c optional Signed-off-by: Keith Packard

altos: Enable pyro channel control in telepyro

2012-07-16T22:32:26+00:00

This should make the board actually work now. Signed-off-by: Keith Packard

src: Add driver for AVR internal eeprom. Use for telepyro config.

2012-07-16T21:44:40+00:00

Signed-off-by: Keith Packard

altos: Make telescience-v0.1 build with new ao_data struct

2012-05-27T23:44:01+00:00

Signed-off-by: Keith Packard

altos: Massive product config cleanup

2012-04-14T21:04:29+00:00

Support multiple serial ports more cleanly Split out parts of ao.h into separate feature header files Signed-off-by: Keith Packard

altos: Add support for multiple SPI busses and sharing device drivers

2012-04-14T20:21:09+00:00

The STM32L151 has several SPI busses, and we want to use more than one, so add a 'bus' parameter to the SPI interfaces. To avoid wasting time on AVR and CC1111 processors which only use one SPI bus, elide those parameters from the actual functions by wrapping them with macros. Configuring chip select is now all macroized so that each chip can have its own version, allowing the STM to share the various SPI device drivers with the cc1111 and avr processors. Note that only the M25 driver has been ported; porting the others is 'trivial', but not necessary at this point. Signed-off-by: Keith Packard

altos/avr: telescience doesn't have room for the flash write code

2011-10-12T00:57:32+00:00

This is useful for debugging the SPI and flash drivers, but not necessary in production code. Signed-off-by: Keith Packard

altos/avr: telescience does not have a serial port

2011-10-11T23:42:24+00:00

The USART is used for SPI to talk to the flash part. Signed-off-by: Keith Packard