mjb/altos/src/ao_timer.c, branch with-pdclib

altos: Restructure altos build to prepare for multi-arch support

2011-08-26T03:49:11+00:00

Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard

altos: prepare for sdcc 2.9.1

2010-08-27T07:10:29+00:00

A few minor language changes -- non-standard keywords are now prefixed with __, such as 'at', 'interrupt', 'naked'. Signed-off-by: Keith Packard

Change altos build process to support per-product compile-time changes

2010-02-21T04:30:27+00:00

This creates per-product subdirectories and recompiles everything for each product, allowing per-product compile-time changes for things like peripheral pin assignments and attached serial devices. Signed-off-by: Keith Packard

No need to wakeup &ao_tick_count now

2009-10-31T08:30:22+00:00

Use ao_alarm for ao_delay so it can be easily interrupted

2009-10-31T08:19:41+00:00

Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4

2009-06-17T20:55:23+00:00

None of our boards have a 32kHz xtal oscillator, instead we use those pins (on Telemetrum) for the deployment firing circuits. The old clock initialization code was switching from the 32kHz RC oscillator to the 32kHz crystal and overriding our use of those pins. Signed-off-by: Keith Packard

Use autotools, move altos to src subdir

2009-06-04T17:41:34+00:00

Signed-off-by: Keith Packard