mjb/altos/src/ao_teledongle.c, branch telescience-v0.2

altos: Restructure altos build to prepare for multi-arch support

2011-08-26T03:49:11+00:00

Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard

altos: Don't init packet slave on TD. Make slave start optional

2011-03-20T06:27:15+00:00

Oops. TeleDongle was starting the packet slave code, which kinda wrecked its ability to receive telemetry packets. This patch simply removes the packet slave code from teledongle as it cannot be used (yet), it also makes the packet slave code initialization take a parameter which controls whether to start that by default; in the future, perhaps TeleDongle will gain a command to start packet slave mode. Signed-off-by: Keith Packard

Fix up LED colors for each product.

2010-02-27T23:14:04+00:00

Different products assign different color LEDs to the two available LED drivers (P1_0, P1_1). Make the LED color pin assignments per-product (in ao_pins.h), then deal with not always having a green LED. Signed-off-by: Keith Packard

Change altos build process to support per-product compile-time changes

2010-02-21T04:30:27+00:00

This creates per-product subdirectories and recompiles everything for each product, allowing per-product compile-time changes for things like peripheral pin assignments and attached serial devices. Signed-off-by: Keith Packard

Enable packet-based communcation to command processor

2009-11-02T04:57:03+00:00

This splits the packet code into master/slave halves and hooks the slave side up to the getchar/putchar/flush logic in ao_stdio.c Signed-off-by: Keith Packard

Initial packet bits. Just testing transmission

2009-10-30T23:39:15+00:00

Remove bit-banging debug support from TM board builds

2009-09-03T05:01:52+00:00

Our current TM boards don't have the wires to do bit-banging to another cc1111 board, so it doesn't make sense to fill up their flash with useless code (and the 'help' text with useless commands). Leave this to the TI board until we have boards that can serve as debug dongles. Signed-off-by: Keith Packard

Fix clock initialization to not try to use 32kHz xtal on P2_3/P2_4

2009-06-17T20:55:23+00:00

None of our boards have a 32kHz xtal oscillator, instead we use those pins (on Telemetrum) for the deployment firing circuits. The old clock initialization code was switching from the 32kHz RC oscillator to the 32kHz crystal and overriding our use of those pins. Signed-off-by: Keith Packard

Use autotools, move altos to src subdir

2009-06-04T17:41:34+00:00

Signed-off-by: Keith Packard