mjb/altos/src/ao_product.c, branch pwmin

altos: Restructure altos build to prepare for multi-arch support

2011-08-26T03:49:11+00:00

Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard

altos: product defines are always in ao_product.h

2011-07-07T00:49:01+00:00

When all products were built in a single directory, each one had a separate version of ao_product.h. Now that they all reside in sub-directories, each directory has its own ao_product.h This change is needed so that other modules in the system can use the product defines; otherwise, ao_product.h was not built at the right time. Signed-off-by: Keith Packard

altos: Add split telemetry code

2011-07-05T01:09:03+00:00

This sends every packet every time, which isn't correct, but should be useful for testing. Signed-off-by: Keith Packard

altos: Make serial, usb, beeper and accelerometer optional components

2011-03-16T22:57:37+00:00

Not all boards will have these, so fix places that use them to deal with that. Signed-off-by: Keith Packard

altosui: write USB serial number string while flashing

2010-08-24T11:02:27+00:00

USB serial number is encoded in UCS2 as a part of the string descriptors. Place those right after the other rom config bits so that altosui can find it. altosui is changed to write the serial number there. Signed-off-by: Keith Packard

altos: Place rom config variables in fixed location

2010-08-24T05:03:36+00:00

The device serial number and radio calibration values are stored in flash, mostly so that TeleDongle gets them saved. Placing them in well-known locations (starting at 0xa0) makes it possible to find the previous configuration and to re-write it easily, without requiring the .map file. altosui doesn't have the .map file parsing code, so it relies upon this new technique. As a benefit, it reads the old values from the device before reprogramming it. Signed-off-by: Keith Packard

altos: Define USB product ID in per-product Makefile.defs file

2010-08-22T00:09:41+00:00

This allows Win7 to tell which kind of device is connected purely by USB id as it doesn't expose the USB product ID string to user space. Signed-off-by: Keith Packard

Use autotools, move altos to src subdir

2009-06-04T17:41:34+00:00

Signed-off-by: Keith Packard