mjb/altos/src/ao.h, branch debian/1.6.4-1

altos: Restructure altos build to prepare for multi-arch support

2011-08-26T03:49:11+00:00

Split out sources into separate directories: core: architecture and product independent bits cc1111: cc1111-specific code drivers: architecture independent drivers product: product-specific sources and Makefile fragments util: scripts for building stuff This should have no effect on the built products, but testing is encouraged Signed-off-by: Keith Packard

altos/altosui: Add ability to disable telemetry/rdf completely

2011-08-20T18:36:51+00:00

This turns off the telemetry system so that it never transmits telemetry or RDF tones. In idle mode, it will still accept packet mode connections. Signed-off-by: Keith Packard

altos: Correct AO_CONFIG_MINOR from 6 to 7

2011-08-14T06:56:06+00:00

Forgot to bump this when adding radio setting. Signed-off-by: Keith Packard

altos: Send serial/flight to companion board

2011-08-14T01:46:12+00:00

Lets the companion log them for later matching with TeleMetrum log Signed-off-by: Keith Packard

altos: Send SPI message at flight state changes

2011-08-14T01:46:12+00:00

Get the companion board starting its data logging as soon as possible after boost starts. Signed-off-by: Keith Packard

altos: Add SPI-based companion board support

2011-08-14T01:46:12+00:00

This sends current flight state information and retrieves companion data to include in telemetry. Signed-off-by: Keith Packard

altos/altosui: Report log format in the version command

2011-08-14T01:44:26+00:00

This will make it easier to figure out what the contents of the flash should look like from altosui; the current 'guessing' mechanism will not scale to many more formats. Signed-off-by: Keith Packard

altos: Pull igniter pins low as soon as possible at boot time

2011-08-11T22:57:58+00:00

This reduces the pulse width on the igniter circuit caused by the default cc1111 pin configuration at powerup time. Signed-off-by: Keith Packard

altos: Add ability to set arbitrary radio frequency

2011-08-08T19:13:28+00:00

This adds a separate config parameter to control the raw radio frequency setting, allowing the user to select an arbitrary frequency instead of being forced to choose one of the 10 pre-defined 'channels'. Signed-off-by: Keith Packard

altos/altosui: Add pad orientation configure option

2011-08-03T02:07:56+00:00

Allow TeleMetrum to be operated with the antenna pointing downwards on the pad. This provides some additional flexibility when designing an ebay. The accelerometer calibration levels are flipped around to match, so no re-calibration should be required. Signed-off-by: Keith Packard