mjb/altos/src/Makefile, branch debian/1.6-1

altos: Rename teledongle-v1.9 as teledongle-v3.0

2015-02-05T04:33:04+00:00

No hardware changes from the 1.9 prototypes to the 3.0 final version. Signed-off-by: Keith Packard

altos: Add support for TeleBT v3.0

2015-01-24T19:18:59+00:00

Add support to the BTM driver for non-CC1111 interrupts Add HW flow control to STM serial driver Signed-off-by: Keith Packard

altos: Build TeleDongle v1.9 by default

2014-10-25T17:21:30+00:00

Signed-off-by: Keith Packard

altos: Add telerepeat-v1.0

2014-08-18T04:03:12+00:00

This uses TeleBT hardware to provide a telemetry repeater, receiving packets on one frequency and re-transmitting them on another. Signed-off-by: Keith Packard

change easymega from v0.1 to v1.0, tweak to build on master, add to Makefile

2014-08-15T00:16:14+00:00

altos: Use 32-bits for flight state data (alt/speed/accel)

2014-07-11T00:35:44+00:00

Stores 32-bits for all of the flight parameters. Uses 64-bit intermediates for kalman computation. Signed-off-by: Keith Packard

altos: Add smaller pa to altitude table for TeleMini

2014-07-09T07:26:03+00:00

TeleMini doesn't have space for the larger table, and the smaller one isn't that much less accurate at lower altitudes. Signed-off-by: Keith Packard

Add support for the "kite" micropeak variant

2014-07-06T19:36:27+00:00

This uses a 100m 'launch detect' altitude and logs data every 19.2s instead of every .192s. Signed-off-by: Keith Packard

altos: Re-enable telemini v2.0 builds

2014-06-12T01:53:42+00:00

Signed-off-by: Keith Packard

altos: Disable TeleMini v2.0 build for now

2014-06-12T01:50:07+00:00