mjb/altos/doc, branch plot-gps-heightAltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=plot-gps-height2013-01-16T18:38:52+00:00doc: Add simplesect headers to release notes2013-01-16T18:38:52+00:00Keith Packardkeithp@keithp.com2013-01-16T18:37:55+00:00urn:sha1:994ff76a064dcbd3113db771cd9cd9591fd68dea
This makes it easy to see which changes are from each version of the software.
Signed-off-by: Keith Packard <keithp@keithp.com>
document what the 'Age' value in the AltosUI display means2013-01-16T17:46:52+00:00Bdale Garbeebdale@gag.com2013-01-16T17:46:04+00:00urn:sha1:f64fe671b7b4e2389219d672bcea978d0539d4aedoc: Add warning about matching battery voltage.2012-12-15T23:07:07+00:00Keith Packardkeithp@keithp.com2012-12-15T23:07:07+00:00urn:sha1:034dfc4f9bef049b1fb5704873dd76f6a3a9949d
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Add paragraph noting differences in JST polarity2012-12-15T22:47:22+00:00Keith Packardkeithp@keithp.com2012-12-15T22:47:22+00:00urn:sha1:4925a6f2f4edd5b54641a5240030e5c0e3e95db6
Looks like the 'standard' polarity for 3.7V lipos using JST connectors
in RC aircraft is swapped from what Spark Fun uses. Note that in the
docs to try and keep people from wrecking hardware.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos: Note that Lithium battery may be included with MicroPeak2012-12-13T06:53:36+00:00Keith Packardkeithp@keithp.com2012-12-13T06:53:36+00:00urn:sha1:73422bf72e07b169bfe37b02518b9e7479931971
I'm not willing to say that we'll always be able to include a battery,
but we can certainly try, and they're certainly cheap enough that we
should.
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Update MicroPeak doc to include EEPROM and programming info2012-12-13T06:36:45+00:00Keith Packardkeithp@keithp.com2012-12-13T06:35:05+00:00urn:sha1:c8866fbae2b00b1d7a7ddf89a3f971a75d3dcd60
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Minor updates to the micropeak docs2012-11-18T18:20:52+00:00Keith Packardkeithp@keithp.com2012-11-18T18:20:52+00:00urn:sha1:ba3532a8ca7083b09fde5827faeb95f0c2f3b07c
Mention light issue in quick start guide. Update run-time estimate to
40 hours (measured over 44 hours)
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Start updating AltOS documentation for multi-arch2012-11-17T06:19:17+00:00Keith Packardkeithp@keithp.com2012-11-17T06:19:17+00:00urn:sha1:0606dc013d8b89fd5de0548af0de20fdab5c27d4
Now that AltOS supports many processors, start updating the
documentation to match.
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/micropeak: Set boost detect to 10m. Add 30s boost delay.2012-10-30T00:13:23+00:00Keith Packardkeithp@keithp.com2012-10-30T00:07:05+00:00urn:sha1:f7d2613bb0a6ab1c63e3f6252a3a2358fdfbc691
Wait for 30 seconds before even starting look for boost. This provides
an opportunity to close up the airframe, potentially causing pressure
gradients seen by the baro sensor.
Also, require a 10m vertical motion before triggering boost. This
should limit accidental boost detect while capturing any actual flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Add micropeak manual2012-10-29T18:49:23+00:00Keith Packardkeithp@keithp.com2012-10-29T18:49:23+00:00urn:sha1:0d0ece403028e8a4453cc380575ed95c5e00ddb7
Signed-off-by: Keith Packard <keithp@keithp.com>