mjb/altos/doc/micropeak.xsl, branch altosui-ms5611AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=altosui-ms56112012-10-30T00:13:23+00:00altos/micropeak: Set boost detect to 10m. Add 30s boost delay.2012-10-30T00:13:23+00:00Keith Packardkeithp@keithp.com2012-10-30T00:07:05+00:00urn:sha1:f7d2613bb0a6ab1c63e3f6252a3a2358fdfbc691
Wait for 30 seconds before even starting look for boost. This provides
an opportunity to close up the airframe, potentially causing pressure
gradients seen by the baro sensor.
Also, require a 10m vertical motion before triggering boost. This
should limit accidental boost detect while capturing any actual flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Add micropeak manual2012-10-29T18:49:23+00:00Keith Packardkeithp@keithp.com2012-10-29T18:49:23+00:00urn:sha1:0d0ece403028e8a4453cc380575ed95c5e00ddb7
Signed-off-by: Keith Packard <keithp@keithp.com>