mjb/altos/doc/micropeak.xsl, branch 1.1.9.3AltOS - the operating system for Altus Metrum products
https://git.ethernal.org/mjb/altos/atom?h=1.1.9.32012-12-13T06:53:36+00:00altos: Note that Lithium battery may be included with MicroPeak2012-12-13T06:53:36+00:00Keith Packardkeithp@keithp.com2012-12-13T06:53:36+00:00urn:sha1:73422bf72e07b169bfe37b02518b9e7479931971
I'm not willing to say that we'll always be able to include a battery,
but we can certainly try, and they're certainly cheap enough that we
should.
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Update MicroPeak doc to include EEPROM and programming info2012-12-13T06:36:45+00:00Keith Packardkeithp@keithp.com2012-12-13T06:35:05+00:00urn:sha1:c8866fbae2b00b1d7a7ddf89a3f971a75d3dcd60
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Minor updates to the micropeak docs2012-11-18T18:20:52+00:00Keith Packardkeithp@keithp.com2012-11-18T18:20:52+00:00urn:sha1:ba3532a8ca7083b09fde5827faeb95f0c2f3b07c
Mention light issue in quick start guide. Update run-time estimate to
40 hours (measured over 44 hours)
Signed-off-by: Keith Packard <keithp@keithp.com>
altos/micropeak: Set boost detect to 10m. Add 30s boost delay.2012-10-30T00:13:23+00:00Keith Packardkeithp@keithp.com2012-10-30T00:07:05+00:00urn:sha1:f7d2613bb0a6ab1c63e3f6252a3a2358fdfbc691
Wait for 30 seconds before even starting look for boost. This provides
an opportunity to close up the airframe, potentially causing pressure
gradients seen by the baro sensor.
Also, require a 10m vertical motion before triggering boost. This
should limit accidental boost detect while capturing any actual flights.
Signed-off-by: Keith Packard <keithp@keithp.com>
doc: Add micropeak manual2012-10-29T18:49:23+00:00Keith Packardkeithp@keithp.com2012-10-29T18:49:23+00:00urn:sha1:0d0ece403028e8a4453cc380575ed95c5e00ddb7
Signed-off-by: Keith Packard <keithp@keithp.com>