mjb/altos/ao_ee.c, branch debian/0.9.4.5

Use autotools, move altos to src subdir

2009-06-04T17:41:34+00:00

Signed-off-by: Keith Packard

Add configuration support

2009-04-26T07:11:32+00:00

Current config variables: Main deploy altitude above launch (in meters) Acceleration zero g calibration (manual or automatic) Radio channel (freq = 435.550MHz + channel * 100kHz) Callsign (max 8 characters) Supporting this involved shuffling code around so that the non-telemetrum builds could include only the stuff they needed.

Fix up fancy dbg stuff. Add teleterra initial bits.

2009-04-21T08:17:03+00:00

The dbg stuff needed a bit of help to actually walk the tables; it appears that complex expressions confuse sdcc. This also adds primitive teleterra bits, but no UI, etc. Signed-off-by: Keith Packard

Add radio support. Build separate executables for TeleMetrum and the TI dongle

2009-04-21T06:33:41+00:00

Ok, way too big a patch, but things were in rough shape. This patch adds support for the radio, both transmit and receive. Then, because I could no longer run the TeleMetrum code on the TI dongle, I ended up building a separate image for the TI board, which involved creating a mechanism for having multiple command sets and splitting code for different functions into different files.

Start using pdata area for less-frequently used data

2009-04-19T06:19:24+00:00

Fix GPL version at 2

2009-04-19T02:32:18+00:00

Signed-off-by: Keith Packard

Use ao_ee_flush_internal while holding mutex

2009-04-15T04:23:13+00:00

Add in existing flight pieces: flight/report/log

2009-04-15T02:08:01+00:00

These pieces come from the old telemetrum firmware. Signed-off-by: Keith Packard

Add eeprom driver and command loop

2009-04-14T21:21:56+00:00

This involved adding dma control and a mutex implementation. Signed-off-by: Keith Packard