mjb/altos/altosdroid/src/org/altusmetrum/AltosDroid/TelemetryService.java, branch debian/1.6.8-2

Switch from GPLv2 to GPLv2+

2016-07-12T22:41:41+00:00

Signed-off-by: Keith Packard

altoslib: Store saved state in version-independent format

2016-05-13T06:41:55+00:00

Use AltosHashSet for AltosState so that AltosDroid doesn't lose tracker information when the application is upgraded. Signed-off-by: Keith Packard

Bump java library versions

2016-05-12T19:14:03+00:00

Prepare for 1.6.4 release Signed-off-by: Keith Packard

altosdroid: make disconnect stick past pause/restart

2016-05-12T06:22:15+00:00

Clear the active_device preference on disconnect so we don't reconnect anytime the service gets activated. Signed-off-by: Keith Packard

altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted

2016-05-02T23:18:54+00:00

Dumping the MMA655X data with the 'A' command provides the raw sensor value. On TM v2.0 boards, the sensor is inverted, and all of the firmware uses the inverted value except for the 'dump the raw data' command. As a result, MonitorIdle was using the un-inverted value and displaying mystic values. I've fixed this in the ground station code by checking the product name and conditionally inverting the value (4095 - value) for TeleMetrum v2.0 products. Unknown products will generate a warning dialog on AltosUI so we'll catch places where we've failed to add a new product name. Signed-off-by: Keith Packard

altoslib: Flush during set_state. Don't store listener state.

2016-05-01T01:37:05+00:00

The listener state wasn't used anyways, so don't bother storing it. Also, flush the state during set_state, which actually causes the state to be written out. Signed-off-by: Keith Packard

altosdroid: Add idle mode monitoring, reboot. Start igniters

2016-04-26T03:12:34+00:00

This adds three idle mode operations -- monitor idle, reboot flight computer and test igniters. The igniter test isn't quite wired up. Signed-off-by: Keith Packard

altosdroid: Run even without Bluetooth

2016-04-22T22:53:32+00:00

This lets us view old state information on USB-only devices, or when the bluetooth device can't be enabled. Signed-off-by: Keith Packard

altosdroid: Track device location in app, not telemetry service

2016-04-22T22:49:35+00:00

This means we get location even if there isn't a telemetry device connected, making it possible to walk to old device locations Signed-off-by: Keith Packard

altosdroid: Can only use message once

2016-04-22T02:37:35+00:00

And here I thought re-using the message was clever. That generates a nice exception and crashes the program. Signed-off-by: Keith Packard