mjb/altos, branch teleterra-mockup

altosui: teleterra mockup - fix speed values

2011-06-07T04:10:43+00:00

Display ascent speed during ascent, otherwise descent speed Signed-off-by: Keith Packard

altosui: Add mock-up of TeleTerra UI

2011-06-07T03:57:31+00:00

Shows flight monitoring Signed-off-by: Keith Packard

altosui: Handle old TeleDongle receiving kalman telemetry packets

2011-06-03T06:16:30+00:00

The telemetry packets now send the kalman height/speed/accel values instead of the ad-hoc values. If received by an old TeleDongle box, the speed value will be of the form 0x8000abcd, which will be printed as a 32-bit value by TeleDongle. We only want the abcd part, which is the speed * 16. Detect this automatically and compute the correct values for all three. Signed-off-by: Keith Packard

Switch version to 0.9.4

2011-05-26T03:38:02+00:00

For Mayhem, so we can tell what version each board is running Signed-off-by: Keith Packard

Revert "altos: Debugging TBT issues -- check pin configuration after boot"

2011-05-07T06:55:23+00:00

This reverts commit 514348055630edec12224c4b0964240b929759a3. Looks like this was never a problem.

altos: clear CPU port 1 interrupt flag when handled

2011-05-07T06:12:47+00:00

Signed-off-by: Keith Packard

altos: Hook up the P1 ISR for TeleBT v0.1 bt_link line

2011-05-07T05:59:15+00:00

Otherwise, we're heading off into the weeds... Signed-off-by: Keith Packard

altos: Initialize beeper for telebt

2011-05-07T05:49:54+00:00

Needed to get sounds to come out Signed-off-by: Keith Packard

altos: Debugging TBT issues -- check pin configuration after boot

2011-05-07T05:42:58+00:00

Make sure the serial pins are configured as peripherals Make sure the ser_reset and bt_link pins are going the right direction. Signed-off-by: Keith Packard

altos: Add beeper to TBT v0.1

2011-05-07T05:42:32+00:00

It's available, let's use it. Signed-off-by: Keith Packard