mjb/altos, branch 1.4.9.1

Bump version to 1.4.9.1 -- on the way to 1.5

2014-07-07T03:10:21+00:00

Add support for the "kite" micropeak variant

2014-07-06T19:36:27+00:00

This uses a 100m 'launch detect' altitude and logs data every 19.2s instead of every .192s. Signed-off-by: Keith Packard

telegps: Support variable telemetry rate

2014-07-05T07:38:10+00:00

Add combo box to monitoring window and device configuration. Signed-off-by: Keith Packard

altosui: Support telemetry data rates

2014-07-05T07:38:10+00:00

Add combo box to flight UI and flight hardware configuration UIs Add telemetry rate to the TD/TBT config dialog Signed-off-by: Keith Packard

altosuilib: Add telemetry rate to Scan UI

2014-07-05T07:38:10+00:00

Let the user scan for multiple data rates as well as telemetry formats and frequencies Signed-off-by: Keith Packard

altoslib: Support multiple telemetry rates

2014-07-05T07:38:10+00:00

Altos now supports 2400 and 9600 baud in addition to the classic 38400 baud rate. Add support to altoslib for these as well Signed-off-by: Keith Packard

altos: Rework packet receive for cc1120

2014-07-05T07:38:10+00:00

Instead of blocking on PQT, just set up the receiver to start going and when the first bit interrupt comes in, grab the SPI bus if possible and configure it for reception. This improves sensitivity in the radio by a significant amount while making the code conceptually a bit nicer. Signed-off-by: Keith Packard

altos: Add telemetry rate support to CC1120 driver

2014-07-05T07:38:10+00:00

This supports the new 2400 and 9600 baud rates Signed-off-by: Keith Packard

altos: Packet reception tuning for cc1120 driver

2014-07-05T07:38:10+00:00

This adjusts the cc1120 receive parameters to increase sensitivity at the expense of reporting many more invalid packets to the UI. Signed-off-by: Keith Packard

altos: Add 2400 and 9600 baud telemetry support to cc115l driver

2014-07-05T07:38:10+00:00

Signed-off-by: Keith Packard